manualshive.com logo in svg

Alinking ALS-7721, User Manual

Share
Download
Alinking ALS-7721 User Manual Download Page 65

65 

Basic Setting > Network > Multicast 

This function allows multiple people to watch video streaming without limitation on the number of 
users, but is only applicable in the LAN environment. The video streaming format (h2644/MJPEG) 
depends on the selected image format setting in Basic Setting 

→

 Video/Image 

→

 Video Format. 

 

 

Basic Setting > Network > Multicast > H264 (Main Stream) 

This function allows multiple users to view the H264 video stream free from restrictions on the 
number of users. However, this is only effective within the LAN. 
 

 

Basic Setting > Network > Multicast > H264 (Sub Stream) 

This function allows multiple users to view the H264 video stream free from restrictions on the 
number of users. However, this is only effective within the LAN. 
 

 

Basic Setting > Network > Multicast > Motion JPEG 

This function allows multiple users to view the Motion JPEG video stream free from restrictions on 
the number of users. However, this is only effective within the LAN. 

 

 

 

NOTE

：

 

Please make reference to the chapter of 

Appendix J: Multicast Application

 for different environment description.

 

 

Multicast Setting 

Summary of Contents for ALS-7721


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands