91
•
General:
Name:
Name the trigger event here.
•
Response to event trigger: the time setting of the trigger event
Always:
Always monitoring
During time: Check the date you want to monitor (Sun~Sat) and the duration of monitoring here.
For example, if you want to set the camera to monitor from 7 pm after work to 7 am
next morning from Monday to Friday, check the boxes from Monday to Friday, enter
“19:00” in the “Start From” field, and enter “12:00” in the “Duration” field.
Never:
Do not set the time.
•
Response process: trigger event response
(Note:
Multiple selections are available
)
Active alarm
out:
An event is detected by the security equipment connected from the DI terminal
behind the machine, such as high-decibel alarms, light projectors. You can set the
alarm duration in the “Duration” field.
Upload video
to :
The camera will save the Motion JPEG or H.264 video of the event to the Upload
Server (FTP) or the Recording Storage Device (Samba).
Batch video upload time:
The camera will follow this setting then continue to
record the video image.
For example:
If the setting is 10 seconds, the each recording image is the 10
second.
Upload img
to :
The camera will save the capture photo of the event to the Upload Server (FTP) or
the Recording Storage Device (Samba).
Send HTTP
notification:
The alarm will be sent to the HTTP server you specified. To use this function, set
the coordinative HTTP server in the Event Server setting page in advance.
Send TCP
notification:
The alarm will be sent to the TCP Server you specified. To use this function, set the
coordinative TCP server in the Event Server setting page in advance.
Send NAP
notification:
The alarm will be sent to the NAP Server you specified. To use this function, set
the coordinative NAP server in the Event Server setting page in advance.
Day Night
Force the camera turn into Day/Night Mode when the trigger is detected.
Click
Save
to save and activate your settings when you completed setting.
NOTE
：
The Add Event setting page and the Add Schedule setting page are basically the same except that the Add Schedule
setting page does not have the option “Trigger by” to indicate the sources of the trigger event.
Delete
Delete the event cluster setting.
Modify
Modify the event cluster setting.
Summary of Contents for ALC-9171
