104
Application Setting > Privacy Mask
The privacy zone function can mask the image in the mask zone to ensure confidentiality. First,
select a mask zone (1 to 3) and a mask color in the privacy zone. Then, move the green frame to
the area you want to mask. Moving the cursor to the bottom right corner of the frame can change
the size of the frame. When the setting is completed, click Save to make the setting effective, and
the screen will automatically refresh within a few seconds after the setting is effective.
Color:
Click the black color to select the color from color-cord table, or input the color-cord to change the
color.
Area:
There are 3 frames available for setting: Area 1, Area 2 and Area 3. Click
AREA
button to open
the Privacy Mask area then click the signal checkbox to enable the function.
Privacy area
Select color
Masked area effect
Summary of Contents for ALC-9171
