18
4. Submit data (Submit)
Click Submit to validate new settings.
5. Confirmation
When all changes have been confirmed, click Exit to quit.
NOTE
：
The IP FINDER can only find the IP addresses of the cameras that share the same hub on the LAN. For information
about finding IP addresses on the Internet, refer to the “DDNS Setting”, or “UpnP Setting”.
All UIC camera/network server products can be found and changed using the IP FINDER software.
When the IP FINDER software cannot be executed, check your antivirus software or firewall to remove the block.
Field description: You can give a name to your camera (such as “MEGA_IP” or “MEGA-IP”). No spaces allowed (such
as “PI IP”).
You can change the settings for IP, Gateway Address and Network Mask to meet the requirements of your network
environment. The product uses HTTP Port1 and does not support Port2 settings.
MAC: Factory default network identity of the machine.
3. Click Submit to validate
new settings.
When all changes have
been confirmed, click Exit
to quit.
Summary of Contents for ALC-9171
