76
Basic Setting > Network > SMTP Server (mail server setting)
This camera is able to transmit images to a particular email address when a motion detection event
occurs or a sensor is triggered. To use this function, a mail server setting for the camera is
required.
Enter the following information in sequential order to complete the setting:
SMTP server:
The SMTP server IP address.
SMTP From:
The email of the sender, i.e. [email protected]
SMTP Authentication:
Enables/disables
User name:
The user name is from SMTP server.
Password:
The password is from SMTP server.
Select
Save
to save the setting.
NOTE
：
The IP Camera can only support the mail account of SSL (Secure Sockets Layer) cryptographic protocol, and the
normal free webmail service belong the TLS (Transport Layer Security) cryptographic protocol
SMTP Setting
Summary of Contents for ALC-9171
