115
Appendix D: Set up the Router setting with IP Camera
You can use DHCP when you want to use the camera on the Intranet (LAN). However, the IP must
be set to fixed when you want to use the camera on a WAN. For this application, it is required to set
up the function of the virtual server on the ADSL router. Follow the steps below to complete the
setting:
1. Enter the camera setting page to set a fixed IP. (Refer to the “Network Setting”.) Ex.:
192.168.0.49
2. Enter the ADSL router main setting page. Ex.: Zonet ADSL router
3. Enter the Virtual Server setting page.
a. Set “mapping of
HTTP Port (80)
and
Definition Port (554)
to
192.168.0.49
”.
b. Restart ADSL router.
When completing the setting, you can operate the camera from the WAN IP Address via the ADSL
router.
NOTE
:
The virtual server setting screen is not the same for all ADSL routers. Refer to the manual of the ADSL router you
purchased for more information about the setting.
Summary of Contents for ALC-9171
