2
1.
Install the mounting bracket in the vehicle using the supplied self-
tapping screws (4pcs) and flat washers (4pcs).
Car body
Washer (M5)
Tapping screw
(M5x20mm)
Mounting bracket
SQL
2.
Position the transceiver, then insert and tighten the supplied
hexagon SEMS screws.
▼
Double check that all screws are tightened to prevent vehicle
vibration from loosening the bracket or transceiver.
2
Initial Installation
Mobile installation
▼
Determine the appropriate angle of the transceiver, using the 3 screw
hole positions on the side of the mounting bracket.
The transceiver may be installed in any position in your car, where the
controls and microphone are easily accessible and it does not interfere
with the safe operation of the vehicle. If your vehicle is equipped with air
bags, be certain your radio will not interfere with their deployment. If you
are uncertain about where to mount the unit, contact your vehicle's dealer.
Caution:
Use only the provided screws to fix the
bracket, otherwise it voids warranty and
you risk damaging the circuit board,
components or fall-off of the unit.
