Alinco DR-B185HE Instruction Manual Download Page 35

Page: 35 / 52

PARAMETER SETTING MODE

The options are as follows.

▼

OFF: Does not set the auto power off function.

▼

10 (min) to 60 (min) /6 steps in 10 minute increments:
Automatically turns off the power after the set time has elapsed.

Press the dial.
The unit will go back to menu mode.

MESSAGE DISPLAYED WHEN turning ON THE POWER

Set whether or not to display the message when turning on the power.

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "10".

The current setting will appear on the

display.

The default setting is "MDL".

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.
The options are as follows.

▼

OFF: Switches to receiving mode immediately.

▼

MDL:

Displays the "DR-B185" for 2 seconds, then switches to receiving

mode.

▼

MSG:

Displays the message set in the next chapter, then switches to

receiving mode.

Press the dial.
The unit will go back to menu mode.

SETTING THE MESSAGE DISPLAYED WHEN TRUNING ON THE POWER

Set the message displayed when turning on the power.

Rotate the dial or press the [UP]/

[DOWN] keys on the microphone to

display the menu number "11".

By refering to the Menu 2 on P.23, edit

the message to display.

Press the dial.
The unit will go back to menu mode.

BCLO SETTING

BCLO stands for Busy Channel Lock Out, and prohibits transmission that

may cause interferences to ongoing communications. Transmission is

possible only in the conditions:

• When the channel is free and clear (BUSY icon is not displayed).
• The CTCSS/DCS setting of receiving signal is different from the current

tone setting.

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "12".

The current setting will appear on the

display.

The default setting is "OFF".

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.
The options are as follows.

▼

ON: Sets the BCLO setting to ON.

▼

OFF: Sets the BCLO setting to OFF.

Summary of Contents for DR-B185HE





















































Search results

Summary of Contents for DR-B185HE

Reviews:

Related manuals for DR-B185HE

Brands by name

Popular brands

Alinco DR-B185HE, Instruction Manual

Search results

Summary of Contents for DR-B185HE

Reviews:

Related manuals for DR-B185HE

Brands by name

Popular brands