Alinco DR-B185HE Instruction Manual Download Page 41

Page: 41 / 52

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "26".

The current setting will appear on the

display.

The default setting is "5" (5sec).

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.
The options are as follows.

▼

OFF (0sec) to 10 (10sec) /11 steps in 1 second increments

Press the dial.
The unit will go back to menu mode.

TONE SEARCH SCANNING SPEED

Set the scanning speed to search a tone frequency from the incoming

tone signal.

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "27".

The current setting will appear on the

display.

The default setting is "FA".

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.
The options are as follows.

▼

FA: Searches fast but less accurate.

▼

SLW: Searches slowly but more accurate.

Press the dial.
The unit will go back to menu mode.

DCS SCANNING SPEED

Set the scanning speed to search a DCS code from the incoming DCS

signal.

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "28".

The current setting will appear on the

display.

The default setting is "FA".

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.
The options are as follows.

▼

FA: Searches fast but less accurate.

▼

SLW: Searches slowly but more accurate.

Press the dial.
The unit will go back to menu mode.

PRIORITY SCAN SETTING

Set whether or not to check every 5 seconds whether the priority channel

receives a signal or not.

Rotate the dial or press the [UP]/[DOWN] keys on the microphone

to display the menu number "29".

The current setting will appear on the

display.

The default setting is "OFF".

Press dial to display SET, then rotate dial or press the [UP]/[DOWN]

keys on the microphone to change the setting.

PARAMETER SETTING MODE

Summary of Contents for DR-B185HE





















































Search results

Summary of Contents for DR-B185HE

Reviews:

Related manuals for DR-B185HE

Brands by name

Popular brands

Alinco DR-B185HE, Instruction Manual

Search results

Summary of Contents for DR-B185HE

Reviews:

Related manuals for DR-B185HE

Brands by name

Popular brands