38
9
Maintenance
Default Setting after Resetting DR-B185
DR-B185
CTCSS
frequency
88.5Hz
VFO frequency
145.000MHz
DCS encode
and decode
-
Memory channel
C (CALL)
DCS code
023N
Offset direction
-
Output power
HI
Offset frequency
600KHz
Key-lock setting
OFF
Channel step
HT: 5KHz
HE: 12.5KHz
TOT
OFF
CTCSS encode and decode
-
APO
OFF
Optional functions will be basically deactivated and programmed values
are erased.
To reset
Perform the reset to resume default setting, 2 reset modes are available.
SYSTEM reset
Resumes default setting without erasing memory channel data.
Turn off. Turn on with
FUNC
key pressed.All LCD segments will be
displayed. Release the key and wait until 145.000 is displayed.
ALL reset
Resumes default setting and clears the memory data. The deleted
memory data can't be recalled.
Turn off. Turn on with
FUNC
and
CALL
keys pressed together.
All LCD segments will be displayed. Release keys and wait until 145.000
is displayed.
Reset is not available in Channel display mode, or
preprogrammed using PC utility software.
Trouble Shooting
Problem
Possible Causes and Potential Solutions
(a)
Power is on, nothing
appears on Display.
+ and - polarities of power connection
are reversed. Connect red lead to plus
terminal and black lead to minus terminal of
DC power supply.
(b)
Fuse is blown.
Check and solve problem resulting in blown
fuse and replace fuse with a new one.
(c)
Display is too dim.
Set the LCD backlight parameter properly.
(d)
No sound comes from
speaker.
• Squelch level too high. Decrease squelch level.
• Selective-calling like TSQ activated. Press
[Moni] key to monitor.
(e)
Key and Dial do not
function.
Key-lock function is activated. Cancel Key-lock
function.
(i)
Rotating Dial will not
change memory channel.
Transceiver is in CALL mode. Press
.
(g)
[PTT] key is pressed but
doesn't transmit.
• Microphone connection is poor. Connect
microphone properly.
• Antenna connection is poor. Connect antenna
properly.
Please contact your dealer when a technical assistance may be
necessary.
