33
Set mode
0HQX.H\SXVKDQGKROGWLPHVHOHFWLQJ
This is to change the time for push and holding key for switching band, scan, set mode, key
lock, CALL, recalling channel, programming memory in easy mode, etc.
1.
Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 19. Factory default setting is [2]
seconds.
2.
By rotating the right dial, the display
changes and the key push and hold time
will be changed. This setting is individual
regardless of the band or VFO.
3.
Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
0HQX$XWRUHSHDWHU
The USA and Korean versions automatically use standard repeater settings (duplex ON/OFF,
duplex direction, tone encoder ON/OFF) when the operating frequency falls within or outside
of the general repeater output frequency range. The offset and repeater tone frequencies are
not changed by the auto repeater function. Reset these frequencies, if necessary.
1.
Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 20.
2.
By rotating the right dial, the Auto
repeater setting will be changed.
3.
Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
NOTE
Use VFO auto program to customize auto repeater setting (See page 57)
