31
Set mode
0HQX$WWHQXDWRUVHOHFWLQJ
The attenuator prevents distortion of a desired signal by very strong RF signals near the
desired frequency or when very strong electric fields, such as from a broadcasting station,
are present at your location.
1.
Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 16.
2.
By rotating the dial, the display changes
as shown and the Attenuator selecting is
changed. Attenuator can be selected for
left and right sides and VFO mode but
cannot be selected for each band.
3.
Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
• OFF : Attenuator function is disabled.
• SQ :
The transceiver has an RF attenuator related to the squelch level setting. Approx.
10dB attenuation is obtained at maximum setting. The squelch attenuator allows you
to set the minimum signal level needed to open the squelch.
• ON :
10dB attenuation is activated on all bands. When attenuator is ON, ATT appears on
the display.
0HQX0HPRU\SURWHFWLRQ
This is to prevent important data from being deleted or rewritten accidentally.
1.
Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 17. Factory default setting is [OFF].
2.
Rotate the right dial to select ON or OFF.
This setting is individual regardless of
the band or VFO.
3.
Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
