10
Initial Installation
,QVWDOOLQJD0RELOH$QWHQQD
Use a 50
:
coaxial cable to connect the antenna.
Mobile antennas require an appropriate mounting
base for proper installation and operation. For more
information, see the documentation for your
antenna.
IMPORTANT
After installing your antenna, ensure that you have the best possible SWR
reading. High RF environments can cause severe damage to your unit.
Ensure that you are not in a high RF environment when operating the
transceiver.
8VLQJWKHPRXQWLQJEUDFNHW
1.
Drill 4 holes where the mounting bracket
is to be installed.
. Approx. 5.5-6mm (1/4”) when using nuts; approx.
2-3 mm (1/8”) when using self-tapping screws.
2.
Insert the supplied screws, nuts and
washers through the mounting bracket
and tighten.
3.
Adjust the angle fort your suitable
position.
Magnet base
Screw-fixed base
<For making 4+/-0.2mm hole in
globe box bottom>
Car body
Mounting bracket
Tapping screw
Washer
VOL
