40
Useful functions
'&66FDQ
This function automatically searches for the DCS tone an incoming signal might carry. This
feature is useful to search for the encoding tone of a repeater, or to communicate with a
station operating in DCS (Digital Code Squelch) mode.
1.
Press FUNC key then repeat pressing
key while [FUNC] appears on the display
to enter the DCS decode setting mode.
2.
Press the UP/DOWN keys on the
microphone for more than 1 second but
less than 2 seconds to start scanning. It
scans 105 codes in order.
3.
When searching, the [DCS] icon will flash
on the display, DCS scanning stops when
the matching code is detected.
4.
The DCS scan won’t resume unless the
operation in step 2 is repeated.
Press any key (other than UP/DOWN
keys) to exit.
.H\/RFN
This will lock the keys to avoid unintentional changes.
1.
Press and hold H/L key.
The [
] icon appears on the display.
2.
To cancel repeat step 1.
3.
With this function activated, only the
following commands can be accessed:
PTT
H/L key to cancel this function
Squelch and volume
UP/DOWN keys
