
12
12. Cable-clone and PC Connection Functions
97
12.
Cable-clone and PC Connection Functions
The Cable-clone function copies data from one DJ-X11 to another DJ-X11.
By connecting two DJ-X11 units with a cable, you can copy the information
(including memory data) specified in the sending unit (herein referred to as
“Master”) to the receiving unit (herein referred to as “Slave”).
In addition to the Cable-clone function the following operations are possible when
the DJ-X11 is connected to a PC.
12-1 PC Connection and Connection Ports
Note that the connection cables vary depending on the function to be used. The
table also includes precautions for connecting an external speaker or earphone
to the earphone jack.
Cable-clone
PC connection
Function
Copy the memory
data and settings of
the source DJ-X11 to
another DJ-X11.
Set the function or
memory of the DJ-
X11 with a dedicated
free utility software.
Operate the major
functions of the DJ-
X11 from the PC in
real time by using the
Remote function via
terminal software or
dedicated software.
Receive audio
signals, detected
signals, and IQ
signals which are
output from the DJ-
X11 and use receiving
software.
Cable
Commercially-
available audio cable
without resistance
with ø3.5 mm
stereo mini-plugs
(3-pole) on both
ends. This cable
is commercially-
available as an
option for audio
equipment or home
appliances.
Alinco's optional
cable ERW-4C,
ERW-7 or ERW-8
Alinco's optional
cable ERW-8
Commercially-
available audio cable
with ø3.5 mm stereo
mini-plugs (3-pole) on
both ends. This cable
is commercially-
available as an option
for audio equipment
or home appliances.
You need to select a
cable with or without
resistance depending
on the conditions
such as the input port
to the PC.
Connection
Ports of DJ-
X11 Ports
Earphone jacks of
both units
ERW-7 (4C):
Earphone jack
ERW-8 : USB port of
EDC-174
USB port of EDC-
174
Earphone jack of DJ-
X11
Connection
of external
device
-
USB port of the PC
(Serial port for the
ERW-4C)
USB port of the PC
LINE-IN or MIC port
of the PC
Remark
-
This connection
can also be used to
update the
fi
rmware.
This connection
can also be used
to update the
utility software and
fi
rmware.
-
Entry to
Clone mode
Necessary (Turn
on the power while
holding down the
[MONI] key.)
Necessary (Turn
on the power while
holding down the
[MONI] key.)
Unnecessary
Unnecessary