36
7. Memory Mode
7
• Bank
The relationship between the bank and the memory is as follows:
Number
Banks for normal memory channels
(This setting may change before shipment due to the change
in memory data.)
PRG
Bank for programmed scan channels
DUAL
Bank for dual band channels. A pair of frequencies for
the main and sub bands are programmed in one memory
channel.
PRIO
Bank for priority channels
PASS
Bank for skip-search channels
BUG
Bank for Bug Detector channels (Cannot be edited.)
Select an appropriate bank according to the usage.
• Memory channel
The number of programmable memory channels differs depending on the
bank type as follow
Number
000 to …
PRG
0A to 49B
DUAL
000 to 099
PRIO
000 to 099
PASS
000 to 099
Select an appropriate memory channel according to the usage.
4
Press the
key to complete the programming.
After the programming is complete, the receiver returns to the previous
operation mode.
MEMO
• By default, it is not possible to overwrite a memory channel to which
data has been programmed.
• To delete or edit memory channel data,
fi
rst disable or temporarily can-
cel the “Write-protect (memory protection) function” (P. 91) and then
continue the procedure.
• By using the free software which can be downloaded from the Alinco
website (http://www.alinco.com/) and the optionally available PC con-
nection cable (ERW-7/ERW-8), you can divide these memory banks as
desired, into up to 50 banks x 1200 memory channels. This operation
cannot be performed with the key pad of the receiver only.