8
8. Functions Assigned to the Key Pad
61
8-10-2 Memory Channel Scope
The reception levels are displayed for the frequencies of neighboring
programmed memory channels with the frequency of the displayed
memory channel in the center.
CAUTION
• The Channel Scope function ignores empty memory channels.
• When there is no memory channel which can be used as a scope tar-
get, the Channel Scope function does not start.
1
In Memory mode, select the bank for which to display a
scope display.
2
Press the
key.
The memory channel scope operation starts. The signals of the displayed
memory channel (center channel) are received and the reception levels of
the nearby programmed memory channels are indicated in the scope display.
3
Rotate the dial to select the center channel.
The center channel changes upward or downward to the next target
memory channel. The scope display shifts to the right or left accordingly.
MEMO
• By pressing the [FUNC] key to display
and then pressing the
key,
you can change the reception operation for the center channel as follows.
Normal mode: When signals are received through the center channel,
the sound is output. The reception time follows the
"Scan mode setting" (P. 88). The Channel Scope
operation always starts in Normal mode.
Display mode: Like other channels, the reception of the center channel
signals is indicated with the level display only and no
sound is output even when signals are received.
• You can switch the band to operate by pressing the
or
keys.
The bands are switched and the Channel Scope operation remains ac-
tive. When the dual-band display is set, the Channel Scope operation
can be conducted simultaneously for both bands.