13
BASIC OPERATIONS
2. Enter the desired frequency by keypad.
In VFO or FM VFO mode, you can directly input frequency by keypad.
Example: To enter 435.0125, press [4][3][5][0][1][2] then 5 appears and sets automatically. To enter 435.100,
press [4][3][5][1][0][0]. By pressing the last [0], a dot appears after the MHz unit and the frequency is set.
Receiving
when a signal is being received, the LED turns green and hear the call.
NOTE: Please be aware of the squelch level and selective-calling settings such as CTCSS and DCS as you
may risk not hearing the receiving signal.
Transmitting
Press and hold [MONI] key to monitor the channel to ensure it is not busy. Press and hold [PTT] key and
talk to speaker. While transmitting, the LED turns red.
Please keep the distance between mouth and speaker to be 2.5-5Cm, speak in normal tone to get the
best acoustic fidelity. Release the PTT to stop transmitting. The red LED turns off.
Side Key [PF1]/[PF2] Function
These are programmable keys. You can assign the desired functions by both transceiver setting and by
PC software. See page 45 for instructions. Detailed setting may require a PC programming.
1.
VOLT:
Battery capacity inquiry, assign this function to display battery level.
