40
FUNCTION MENU SETUP
Scan Dwell Time
There are three kinds of scan dwell time for optional.
1. After pressing
key, the top corner of LCD displays " " icon, then press
key .
2. Press
/
key to choose menu 25 and display "
SCAN
".
3. Press
key enter into next menu, LCD displays " " icon, press
/
to select desired setting.
5ST:
When scanning matched signal, transceiver will stop scaning for 5seconds
then resume.
10ST:
When scanning matched signal, transceiver will stop scaning for 10seconds
then resume.
15ST:
When scanning matched signal, transceiver will stop scaning for 15seconds then resume.
2SP:
When scanning matched signal, transceiver will stop scaning, 2seconds after signal disappeared,
then resume.
4. Press
key or
key to confirm and exit.
00~09:
10 levels of squelch in total for optional, “00” is minimum setup value
(normally open)
4. Press
key or
key to confirm and exit.
Function Icon Stay Time
This function allows the user to choose how to display Icon " " in the desired way.
1. After pressing
key, the top corner of LCD displays " " icon, then press
key.
2. Press
/
key to choose menu 26 and display "
FTIME
".
