07
PREPARATION
Installing / Removing the Belt Clip(Optional)
Place the belt clip to the screw holes on the back of the
transceiver, and fix it by provided screws.
Installing Optional Microphones
Unveil the MIC-SP jack cover and insert the Microphone plug
into MIC-SP jack.
NOTE:
1. To keep the radio dust and splash resistant, the cover must
be closed properly with the original supplied cover.
2. The radio is not dust and splash resistant while using the
optional accessory risking that the water may penetrate
inside through the plug.
Do the opposite to remove
Check the tightness of the fixing screws from time to time.
(screws siz 2.5 x 5mm).
