Alinco DJ-CRX7 Instruction Manual Download Page 20

Page: 20 / 70

▲

The charger is to charge the battery pack only. It is not an AC adapter to operate the radio. Never

attempt to transmit the radio with using the charger as it will cause the damage to the charger and

a repair/replace may become necessary.

▲

The charge should be conducted in an ambient temperature with a proper air-conditioning in an

extremely hot or cold seasons.

▲

Try charging the battery pack only when having trouble charging with the radio.In case the radio

may have troubles, the charge can't be conducted properly. If the battery pack can be charged

alone, please take the radio to your local dealer for services.

Note : Battery pack discharges faster when it is attached to the radio. Please always remove it from the
radio when not in use.

BATTERY INFORMATION

How to Store the Battery

1. The battery should be kept in the status

of 50%-100% charged when storing.

2. It should be kept in cool, dry environment

and remove it from the transceiver.

3. Keep away from source of heat and

direct sunlight.

WARNING

▲

Do▲notshort-circuit▲battery▲terminals.

▲

Never▲attempt▲to▲remove▲the▲casing▲from▲the▲battery▲
pack.

▲

Never▲ assemble▲ the▲ battery▲ hazardous▲ in▲ explosive▲
atmosphere▲as,▲spark▲may▲cause▲explosion.

▲

Do▲not▲put▲the▲battery▲in▲hot▲environment▲or▲throw▲it▲
into▲fire,▲it▲may▲also▲cause▲explosion.

Summary of Contents for DJ-CRX7







































































Search results

Summary of Contents for DJ-CRX7

Reviews:

Related manuals for DJ-CRX7

Brands by name

Popular brands

Alinco DJ-CRX7, Instruction Manual

Search results

Summary of Contents for DJ-CRX7

Reviews:

Related manuals for DJ-CRX7

Brands by name

Popular brands