Floppy
— The computer attempts to boot from the floppy disk drive. If no
operating system is on the drive, the computer generates an error message.
Hard Drive
— The computer attempts to boot from the primary hard drive. If
no operating system is on the drive, the computer generates an error message.
CD/DVD/CD-RW Drive
— The computer attempts to boot from the optical
drive. If no disc is in the drive, or if the disc is not bootable, the computer
generates an error message.
USB Storage Device
— Insert the memory device into a USB connector and
restart the computer. When
F12 Boot Options
appear in the lower-right
corner of the screen, press F12. The BIOS detects the device and adds the USB
flash option to the boot menu.
NOTE: To boot to a USB device, the device must be bootable. To ensure
that your device is bootable, check the device documentation.
Network
— The computer attempts to boot from the network. If no operating
system is found on the network, the computer generates an error message.
Changing boot sequence for future boots
1
Enter system setup.
See "
Entering System Setup
".
2
Use the arrow keys to highlight the
Boot
menu option and press Enter to
access the menu.
NOTE: Note your current boot sequence in case you want to restore
it.
3
Navigate to
Set Boot Priority
to configure the boot priority.
4
Use the arrow keys to highlight the boot priority and press Enter to display
the different devices.
5
Select the device and press Enter to set the boot priority.
52
Summary of Contents for X51
Page 8: ... Plastic scribe 8 ...
Page 12: ...5 Lift the left panel off the chassis 1 left panel 2 lighting cable 3 chassis 12 ...
Page 23: ...Post requisites 1 Replace the processor cooling assembly 2 Replace the side panel 23 ...
Page 29: ...2 Release the riser cage from the tabs on the chassis 1 chassis 2 screws 2 3 riser cage 29 ...