Advanced
Wake Up by Integrated LAN
Allows the computer to be powered on by
special LAN signals.
NOTE: This option is available only
when Deep Sleep Control is disabled.
USB Wake Support
Allows you to enable or disable the USB
Wake Support.
NOTE: This option is available only
when Deep Sleep Control is disabled.
Boot
Boot Configuration
Bootup Numlock State
Allows you to set the status of the
Num Lock key during boot to On or
Off.
Wait For ‘F1’ If Error
Allows you to enable or disable
system to boot if F1 error occurs.
Secure Boot Control
Allows you to enable or disable the
secure boot control.
Load Legacy OPROM
Allows you to enable or disable the
Legacy Option ROM.
Set Boot Priority
Boot List Option
Displays the available boot devices.
USB Boot Support
Allows you to enable or disable
booting from USB mass storage
devices such as external hard drive,
optical drive, USB drive, and so on.
1st Boot
Displays the first boot device.
Default: Hard disk.
2nd Boot
Displays the second boot device.
Default: USB hard disk.
3rd Boot
Displays the third boot device.
Default: Internal ODD Devices.
4th Boot
Displays the fourth boot device.
Default: USB Floppy Device.
49
Summary of Contents for X51
Page 8: ... Plastic scribe 8 ...
Page 12: ...5 Lift the left panel off the chassis 1 left panel 2 lighting cable 3 chassis 12 ...
Page 23: ...Post requisites 1 Replace the processor cooling assembly 2 Replace the side panel 23 ...
Page 29: ...2 Release the riser cage from the tabs on the chassis 1 chassis 2 screws 2 3 riser cage 29 ...
