If either the system board or the heat sink is replaced, use the thermal grease that is provided in the kit to ensure that thermal
conductivity is achieved.
The following image(s) indicate the location of the fan and heat-sink assembly and provides a visual representation of the installation
procedure.
Steps
1. Align and place the fan and heat-sink assembly on the system board.
2. Align the screw holes on the fan and heat-sink assembly to the screw holes on the system board.
3. In the sequential order (1>2>3>4>5>6>7>8>9), replace the nine screws (M2x3) that secure the fan and heat-sink assembly to
the system board.
NOTE: For computer shipped with NVIDIA GeForce RTX 3060, remove the eight screws (M2x3) that secure the fan and
heat-sink assembly to the system board.
51
