Alienware P150G, Service Manual

Page: 32 / 73

4. Slide the keyboard cable into the connector on the keyboard-controller board and close the latch to secure the cable.
5. Slide the touchpad cable into the connector on the keyboard-controller board and close the latch to secure the cable.
6. Slide the keyboard-backlight cable into the connector on the keyboard-controller board and close the latch to secure the cable.
7. Align the screw holes on the keyboard-controller board bracket with the screw holes on the keyboard-controller board and
palm-rest and keyboard assembly.
8. Replace the three screws (M1.6x1.5) that secure the keyboard-controller board bracket to the keyboard-controller board and
palm-rest and keyboard assembly.
Next steps
1. Install the
battery .
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the base cover .
3. Remove the wireless card .
4. Remove the battery .
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
32