2.1.3 Ports and connectors
2.1.4 Onboard LED
The onboard LED’s are located on the area
highlighted in the image shown. The
RED
light
indicates the motherboard is receiving power
from the power supply, the
YELLOW
light
indicates when the computer is turned on.
2.1.5 Jumper/Header configurations
CMOS jumper [JP1]
This jumper allows the clearing of information stored on the system CMOS RAM
memory. This memory contains information about the system’s setup configuration and
time settings configured through the BIOS setup utility. Once the information is cleared,
the default configuration can be loaded. To clear the information on the system CMOS
RAM do the following:
1. Turn off the computer.
12
Summary of Contents for MJ-12 X2
