Alienware MJ-12 X2, User Manual

Page: 28 / 72

3.2.9 Remote Access Configuration
Remote Access
Selects remote Access type. When enabled, parameters appear for configuration.
[Options are: ‘Enabled’ and ‘Disabled’]
Serial port number
Selects the serial port to be used for console redirection.
[Options are: ‘COM1’ and ‘COM2’]
Serial port mode
Selects the Serial port settings.
[Options are: ‘115200 8,n,1’,‘57600 8,n,1’,‘38400 8,n,1’,‘19200 8,n,1’,‘09600 8,n,1’]
Flow control
Selects the Flow Control for console redirection.
[Options are: ‘None’, ‘Hardware’ and ‘Software’]
Redirection after BIOS POST
Determines for how long the redirection to the serial port chosen above will take place
during the POST. Disable will turn off redirection after POST. Boot Loader will activate
redirection during POST and during Boot Loader only. ‘Always’ will activate redirection
all the time, but might cause some OSes to stop booting.
[Options are: ‘Disable’, ‘Boot Loader’, and ‘Always’]
Terminal Type
Selects the type of terminal determined for target.
[Options are: ‘ANSI’, ‘VT100’ and ‘VT-UTF8’]
28