Replacing the keyboard
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Procedure
1
Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.
2 Replace the 32 screws (M1.2x1.9) that secure the keyboard to the palm-rest assembly.
3 Replace the eight screws (M1.2x2.4) that secure the keyboard bracket to the palm-rest assembly.
Post-requisites
1
.
solid-state drive/Intel Optane
.
.
5 Follow the procedure from step 2 to step 6 in
.
.
7 Follow the procedure from step 4 to step 6 in
.
, whichever applicable.
94
Summary of Contents for m17 P37E
