66 | Operating the monitor
When you change the default setting of power saving features for the first time,
such as
Uniformity Compensation
,
Smart HDR
, or
USB
, the following message
appears:
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
The OSD functions only in the normal operation mode. If you press the joystick
during the Standby mode, the following message will appear depending on the
selected input:
Activate the computer and wake up the monitor to gain access to the
NOTE: The message may be slightly different according to the connected
input signal.
