Replacing the Optical Drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your Computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1. Align the screw holes on the optical-drive bracket with the screw holes on the optical drive.
2. Replace the screws that secures the optical drive to the optical-drive bracket.
3. Align the screw holes on the optical-drive assembly with the screw holes on the chassis.
4. Replace the screws that secure the optical-drive bay assembly to the chassis.
5. Plug the power cable and data cable to the optical drive.
Post-requisites
1. Replace both the left and right side-panels. See “
”.
2. Replace the
31
Summary of Contents for Area-51 ALX
