53
8.
Click
OK
to finish the settings.
9.
Repeat above steps to configure settings for other channels.
7.6 Exception Settings
The exception setting allows the DVR to alert you when irregular events
occur. These events include:
•
HDD Full:
All installed HDD are full.
•
HDD Error:
Errors occurred during writing of the HDD, no HDD
installed or HDD had failed to initialise.
•
Network Disconnected:
Disconnected network cable.
•
IP Conflict:
Conflict in IP address setting.
•
Illegal Login:
Incorrect user ID or password used.
•
Video Output Standard Mismatch:
video output standards do not
match with each other.
To set exceptions:
1.
Click Menu > Settings> Exception to enter the Exception menu.
2.
Select the exception to configure under
Exception Type
.
3.
Select triggering options, as shown in Figure22. Trigger options are
further explained in the next section (See
Understanding Exception
Trigger Options).
Figure 20.
Exception Menu
4.
Click
OK
to save settings and exit Exception menu.
7.7 Understanding Exception Trigger Options
When setting up exception handlers for such features as motion detection and relay
alarms, you may select triggering options to alert you of these exceptions.
The triggering options that you may select include:
