51
HD-TVI 23x Zoom PTZ Camera User Manual
PRELIMINARY
SECTION 4: CONFIGURING THE PTZ CAMERA
4.12.2 AUXS submenu (Auxiliary alarm output)
An auxiliary output is a configurable alarm output interface on the camera back box which can connect and trigger another alarm
device to operate. You can configure two auxiliary outputs.
1.
Open the alarm auxiliary output configuration submenu (AUX). Go to
MAIN MENUS
g
DOME SETTINGS
g
AUXS
2.
Click
IRIS+
to edit the status of the auxiliary outputs. You can set the alarm output type as OPEN (normally open) and CLOSE
(normally closed).
3.
Move the cursor to
DWELL TIME
to set the duration of the auxiliary output signal. The configurable rage is 0~60 seconds.
4.
Link the auxiliary output to the configured alarm.
a.
Open
MAIN MENUS
g
DOME SETTINGS
g
ALARMS
g
ALARM SETTING
, then choose the alarm number that
you want to link the auxiliary output to.
b.
Move the cursor to
AUX
, then click
IRIS+
to configure the auxiliary output to the alarm. You can choose NONE to
disable auxiliary alarm outputs, choose 1 to activate AUX 1, or choose 2 to activate AUX 2.
