20
Modify Network Parameters
2. In the popup window, edit the current network parameters, and then enter the
admin
user password in the field at the bottom.
a.
Enable DHCP
: You can select
Enable DHCP
to acquire compatible network settings from a DHCP server installed on
the LAN. However, these settings can be changed by the DHCP server. Since it is recommended to use an unchanging
IP address, you can use DHCP to acquire compatible network settings, and then uncheck
Enable DHCP
and save that
configuration to retain the new network parameters.
b. In the example below, the IPv4 address was changed to 192.168.3.100, and the IPv4 Gateway was changed to 192.168.3.1.
These settings were determined to be compatible with the network router and other devices that share the same router.
3. Click
OK
to save your settings. The parameter change(s) will be shown device’s network parameters (see below).
SECTION 3: CONFIGURE NETWORK ACCESS
