11
ALI-NP7022RT IP PTZ Camera Installation Guide
—
For cement wall mounting, use the expansion screw to anchor the bracket.
—
For wooden wall mounting, use self-tapping screw to anchor the bracket.
—
Make sure that the wall is strong enough to withstand more than
8 times
the weight of the camera and the bracket.
2. Using the mounting bracket as a template, mark the location of the mounting screw holes on the mounting surface. Also mark
the location of a hole for the camera drop cable. The drop cable will be routed through the mounting bracket and through the
mounting surface.
3. Drill holes in the mounting screws and hardware. Also, drill a 1½” diameter hole in the mounting surface for the interface
extension cables.
4. Clip the safety cable to the loop on the camera mounting bracket. Allow the camera to hang in place.
5. Open the top cover of the camera with the hex wrench provided. The camera drop cables are under the cover.
Camera top
cover open
Opening for
extension cables
6. Route the LAN and power cables (or LAN cable if using PoE), audio, microphone, alarm and RS-485 cables through the wall
mount bracket, and then through the top cover of the camera.
SECTION 2: INSTALLATION
