18
Notice in the screen above, the tool discovered devices with IP addresses of 192.168.3.xxx. It will also list other Alibi compatible
devices on the LAN, and devices with the address 192.168.1.64 (an inactive Alibi device).
3.2 Activate Inactive Alibi device
When an Alibi device is first installed, or reset to its factory configuration, it must be “Activated” before it can be used. In the
Alibi Configuration Tool, “Inactive” devices have a
Security
status of
Inactive
, and an IPv4 address of
192.168.1.64
. A device is
“Activated” when a password is assigned to the
admin
username of the device.
In the example below, an ALI-NP7022RT camera is activated and configured for its network. The procedure is similar for all other
Alibi network cameras currently available.
1. Scan through the list of devices the Alibi Config Tool discovered for the Inactive device you want to activate (see below). Click
on the device in the list to highlight it, and then click the select box to check it. See below.
Activate
SECTION 3: CONFIGURE NETWORK ACCESS
