9
ALI-NP7022RT IP PTZ Camera Installation Guide
SECTION 2: INSTALLATION
SECTION 2
Installation
Before you start:
•
Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are
included:
—
PTZ camera assembly
—
Thread tape
—
Hi-Power PoE injector
—
Gloves
—
Hex L-wrench
—
Quick installation guide (this document)
•
Make sure the mounting surface and fasteners are strong enough to withstand at least 8 times the weight of the camera
assembly and the mounting bracket.
•
For cement walls, use an expansion screw to secure the mounting bracket.
For outdoor installations, refer to “APPENDIX C Lightning and Surge Protection” on page 31 for additional installation
considerations.
CAUTION
Always carry the camera by its Safety cable. A red cable handle is provided.
2.1 Remove the camera from the packaging
1. Remove the camera from the protective packaging.
2. Remove tape from the dome drive, if attached.
Tape
