Alia AMC2100 Series, Operation Manual

Page: 11 / 27

10
3.5 Auto zero Adjustment
When the tube are full pipe, and no flow, flowmeter still show the flowrate, then you could use Auto Zero adjustment to
adjust your flowmeter to Zero, the method as follow:
3.6 Check for power off message
In this setting, Press or button till you selected ZERO and press
ENT
to confirm
OPERATIONS
SET ZERO ESC
In the normal display, press
ENT
button for 5 seconds, then it will go to next setting

123.456 m3
+0.1234
m3/h
Select YES, and press
ENT
to confirm .
ZERO
NO YES
ENT
ENT
ENT

123.456 m3
+0.0000
m3/h
In general display, Press or button to select
，
Press ENT to confirm, then check for the
power off message window
Power off message window
ON: date & time when power on OFF: date & time when power off
Q: the flowrate when power off

the totalizer when power off
Example: 01 means the power off recored series No.(It could record 99 times of power off)
Press PgUP or PgDN check the history record of power off.
Ps: Press PgDN till the last page, OFF option means current date, time, and flowrate.
ON
2008/04/23
13:30:55
OFF
2008/04/23
13:30:55
Q: 1.0234 m3/h

4.123 m3

01 PgUP PgDN ESC
ENT
Zero Adjustment.
Zero Trimming …
Zero Adjustment end. Select ESC, press
ENT
to turn back to the operations select
(If you want to do Zero Adjustment again, Pls select ZERO )
Zero Tirm End
-2.624mv
Zero Esc
ENT
Select ESC, press
ENT
to confirm and turn back to the normal display
OPERATIONS
SET ZERO ESC
ENT
the normal display

123.456 m3
+0.0000
m3/h
ENT