![ALFAtron ALF-UC1 User Manual Download Page 100](http://html1.mh-extra.com/html/alfatron/alf-uc1/alf-uc1_user-manual_2895652100.webp)
100 / 103
ALF-UC1
Your content is removed from the
display and the LEDs on the button
are blinking.
Connection to the Base Unit is lost.
WirelessMedia
tries to restore the
connection automatically. If it fails,
the LEDs on the button start
blinking red.
Unplug the button from your lap-
top and try a new button.
Nothing is shown on the displays
at all
The displays are switched off.
Switch on the display
The display cable is not correctly
connected
Insert the display cable into the
display and the Base Unit
The Base Unit is in standby mode
Briefly push the standby button on
the Base Unit or power off, and
on again.
No LAN connection with the Base
Unit
Wrong IP address
IP address is not within LAN range
DHCP is not enabled.
No Wi-Fi connection between
mobile device and Base Unit
Wrong Wi-Fi frequency
Check mobile device to select the
correct 2.4GHz or 5GHz
Wrong SSID and password
Enter the correct SSID
No audio when transmitting
local files to the Base Unit
Unsupported audio format,
including Dolby MS11, DDCO
DTSLBR, DTSE, DTSNeoUltra, SRS-
THEATERSOUND,
DTS_StudioSound3D, DTS_HD,
If possible, reformat the file to
other audio format, such as DD,
DD+, HE
- AAC, DTS DMP, WMA,
DRA, COOK
There is no sound at main display. No connected audio device.
Make sure the audio is turned on.
Volume is set to OFF.
Adjust level in menu configuration
WirelessMedia
console within
webserver settings.
The volume level is set to low in
the options of the "
WirelessMedia
"
Launcher program on the PC.
Adjust the volume in the
"
WirelessMedia
" Launcher
program on the PC.
Audio signal may be muted.
Click with right-mouse button at
speaker icon within the task-bar
and switch on.
The volume level is set too low.
Adjust the volume level in Options
menu of
WirelessMedia
.
Audio is muted in mixer of volume
in taskbar.
Right-click at speaker icon in the
taskbar, open mixer and unmute
“
WirelessMedia
” or “Video
Playback”.
The software of Video-player
is not up to date.
Update Video-player. Try another
player.
Summary of Contents for ALF-UC1
