2
Please read in full this operating instruction before you install and start using your GRANDE Pellet Boiler.
The devices (hereinafter refered to as "pellet boiler") of ALFA PLAM A.D. company have been developed
and tested in accordance with the safety requirements of the applicable European Directives.
These instructions are intended for end users, installers and repair and service of GRANDE pellet boilers.
If you have any questions regarding the instructions or need an explanation, please contact the
manufacturer or authorized person of ALFA PLAM A.D.
Printing, translation or reproduction of the manual is only possible with the permission of the company ALFA
PLAM.
The amount of CO
2
produced in combustion is equivalent to the amount of CO
2
that the wood has
obtained from the ambient in the environment and changed it in oxygen and carbon.
The use of non-renewable fossil fuels (coal, oil, gas), contrary to what happens with wood, releases into
the atmosphere enormous quantities of carbon dioxide (CO
2
) accumulated for millions of years, and that
increase the greenhouse effect.
The principle of clean combustion fully meets all environmental requirements and a company ALFA PLAM
has created its own development on this basis.
CONTENTS
1.0 CONTENTS OF MANUAL
1.1 UPDATING
2.0 RESPONSIBILITY OF THE PRODUCER
2.1 RESPONSIBILITY OF THE USER
2.2 PREVENTIVE STANDARDS OF MAYOR ACCIDENTS
2.3 TRANSPORT AND HANDLING OF PELLET BOILERS
2.4 RESPONSIBILITY OF THE INSTALLER
3.0 INSTALLING
3.1 SETTING
3.2 FLUE GASES
3.3 INSULATION AND DIAMETERS OF THE OPENING (IN THE WALL AND IN THE ROOF)
3.4 THE COMBUSTION AIR
3.5 ELECTRICAL CONNECTIONS
3.6 NON-RETURN VALVE
3.7 THE MIXING VALVE
4.0 FIRST START-UP OF BOILER
5.0 SAFETY INSTRUCTIONS FOR TECHNICAL MAINTENANCE
5.1 SAFETY RULES FOR USERS
6.0 INSTRUCTION FOR PROPER START-UP OF BOILER AND SAFE CLEANING
6.1 REGULAR MAINTENANCE AND CLEANING
6.2 INSPECTION AND PARTS REQUIRING MAINTENANCE
6.3 SPECIAL MAINTENANCE OF BOILER
7.0 IMPORTANT DATA ON SAFETY
8.0 QUALITY OF PELLETS
8.1 STORAGE PELLETS
9.0 DESCRIPTION AND OPERATION OF THE SAFETY DISPLAY
9.1 DESCRIPTION OF DISPLAY
9.2 BOILER IN THE OPERATION MODE – SWITCHING ON OF THE BOILER
9.3 STOPPING (SWITCHING OFF) OF THE BOILER
9.4 ADJUSTMENT OF TIME SETTING OF A BOILER
9.5 DESCRIPTION OF SYMBOLS AND MESSAGES ON DISPLAY
10.0
MENU
11.0
DESCRIPTION OF ALARM STATES – DESCRIPTION AND CONTROL
12.0
WIRING DIAGRAM
13.0
INFORMATION ON DISPOSAL AND STORAGE OF BOILER
14.0
WARRANTY
14.1
PERIOD OF TIME OF GUARANTEED SERVICING
14.2
GUARANTEE CONDITIONS
15.0
TECHNICAL CHARACTERISTICS OF BOILER
16.0
BOILER SIZE
