23/25
ALFA IN a.s.
©
www.alfain.eu
10. JOBS
JOBs are available only in TIG method. Before manipulation with JOBs is
necessary to select TIG method by means of the button
V29
(TIG LIFT) or
V30
(TIG HF).
The welding machine has a choice from 9 JOBs.
HOW TO LOAD THE SAVED JOB
1. By long pressing the encoder
V22
enter into the JOBs menu. LED
V2
will
shine. The left display
V4
will show
Job
and the right display
V8
will show
JOB’s number (1-9).
2. Rotate the encoder
V22
to selection of required JOB’s number.
3. Press the encoder
V22
to confirm the selected JOB. Then you get back to
the parameter setting.
4. Note: If you will be in JOBs menu and if you don’t select any JOB within
10 s, you automatically get back to the parameters setting without any
changes.
HOW TO SAVED PARAMETERS TO THE JOB
1. By long pressing the encoder
V22
enter into the JOBs menu. LED
V2
will
shine. The left display
V4
will show
Job
and the right display
V8
will show
JOB’s number (1-9).
2. Rotate the encoder
V22
to selection of required JOB, which you want to
change (for example JOB 1).
3. Confirm selected JOB by pressing the encoder
V22
. Then you get back to
the parameters setting.
4. Parameters, which you want to save like JOB 1, set by means of the
encoder
V22
. (By short pressing the encoder
V22
switch between
particular parameters of the curve.)
5. As soon as you will have saved all parameters, then by long pressing the
encoder
V22
get into the JOBs menu. The left display
V4
will show Job
and the right display
V8
will show number 1.
6. Your parameters selection confirm by pressing the button of welding
method selection
V1
. Then short press the encoder
V22
to exit from the
JOBs menu and for return to the parameters setting.
HOW TO DELETE SAVED PARAMETERS FROM THE JOB
It is not possible to delete parameters from the JOB, they can be only replaced
by new parameters. To save new parameters, see the chapter HOW TO SAVED
PARAMETERS TO THE JOB above.
