14/25
ALFA IN a.s.
©
www.alfain.eu
K10
LED down slope
0 – 10 s
K11
LED base current 10 – 320A/400A
K12
LED main welding current
10 – 320A/400A
K13
LED up slope
0 – 10 s
K14
LED starting current
10 – 320A/400A
7. GETTING STARTED
Getting started must be consistent with technical data and conditions of use.
GETTING STARTED MMA – COATED ELECTRODE
Fig. 5 – Getting started MMA
1.
Insert the mains plug into a suitable 3x400 V mains socket, 50-60 Hz. The
supply fuses or circuit breaker should correspond to the technical data
stated in this manual.
2.
Connect the welding cables to the quick connectors (+)
A4
and (-)
A2
according the instruction on the electrodes packing.
3.
Switch the machine on by the main switch
A8
.
4.
By means of the button
V1
select MMA method, LED
V28
will shine.
5.
By means of the button
V23
select the welding current mode (AC or DC)
6.
By means of the encoder
V22
set the welding current. The values will be
showed on the display
V4
.
7.
Press and then rotate the encoder
V22
to adjusting the level of HOT
START (increase of current during arc ignition time), ARC FORCE (an
automatic increase of the welding current in case the electrode touches
the welding piece) and Arc Length.
