15/25
ALFA IN a.s.
©
www.alfain.eu
8.
Then switch to the MMA mode by means of the encoder
V22
, LED
V18
must shine and
LEDs
V7
and
V11
may not illuminate.
9.
Connect the earthing clamp to the weldment.
10. Insert into the electrode holder the appropriate electrode and you can start
welding.
NOTE
Prevent touching the electrode any metal material for in this mode
the quick connectors
A4
and
A2
are under current.
Insert the coated electrode into the electrode holder, connect the clamps of the
ground cable to the welding piece and you may start welding.
GETTING STARTED TIG
TIG MODE WITH WATERCOOLED TORCH
Fig. 6 – Getting started TIG with watercooled torch
