background image

1.

 

PURPOSE OF THE INSTRUCTION 

 
The purpose of this Instruction is to instruct the user to take all necessary safety precautions and all the necessary 

actions which will guarantee proper and safe use of the heating appliance. 

AMENDMENTS 
This Instruction takes into account all the advanced technology existing at the time of placing the pellet boiler on the 

market. 

The Instruction does not apply to the products already on the market accompanied by appropriate technical 

documentation, and cannot be considered incomplete or inadequate after each change, adaptation or application of new 
technologies on newer products. 

Carefully read and study the contents of this booklet. All information presented in this booklet should be considered 

necessary for proper installation, use and maintenance of your boiler. 

Carefully store the Instruction in a safe place. This Instruction for use, maintenance and installation is considered an 

integral part of the pellet boiler. 

If the boiler is sold to a third party, this Instruction must be delivered together with the boiler. 
If you lose the Instruction, you can request a new copy from the manufacturer or an authorized vendor. 
 

2.

 

MANUFACTURER’S RESPONSIBILITY 

 
By delivering this Instruction, Alfa Plam a.d. disclaims any criminal or penal liability for direct or indirect causing of: 

 

accidents and/or damage occurred due to non-compliance with standards and notes contained in this Instruction; 

 

accidents and/or damage occurred due to improper or incorrect use by the user; 

 

accidents and/or damage occurred due to modifications or maintenance without authorization from the 

manufacturer Alfa Plam a.d.; 

 

insufficient maintenance; 

 

unforeseen situations; 

 

accidents and/or damage occurred due to use of non-original or inappropriate spare parts. 

Installations is solely within the responsibility of the installer. 
 

2.1.

 

MAIN USER RESPONSIBILITIES  

The boiler user must be an adult and responsible person. 
Make sure that children do not approach the boiler while in operation, with the intention of playing.  
Children must not approach the boiler while in operation with the intention of playing. This appliance can be used by 

children aged 8 and older and persons with reduced physical, sensory or mental abilities, if they are supervised by an adult 
who is familiar with the instructions for use. Boiler cleaning and maintenance cannot be performed by children without the 
supervision of an adult. 

 

2.2.

 

REQUIRED GENERAL STANDARDS  

Grande 37 Lux product has been manufactured in accordance with the following standards: 
2006/42/EC MACHINERY DIRECTIVE 
2014/35/EU LOW VOLTAGE DIRECTIVE  
2014/30/EU ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (EMCD) 
2011/65/EU Restriction of the use of certain hazardous substances (RoHS Directive) 
2009/125/EC Ecodesign Directive 
 

2.3.

 

HARMONIZED STANDARDS:  

-    EN 303-5; 

-    EN 50581; 
-    EN 61000-6-2; 
-    EN 61000-6-3; 
-    EN 60335-1; 

-    EN 60335-2-102; 
-    EN 62233; 
-    Commission Regulation (EU) 2015/1189; 
 

2.4.

 

TRANSPORTING AND MOVING THE PELLET BOILER 

Take care of own safety when moving the boiler. Prior to transporting and moving the pellet boiler, which should be done 

with maximum safety precautions, make sure that the load capacity of the cart is sufficient to lift the boiler. Avoid sudden 
movements and/or improvised methods of moving the boiler. Boiler handling in terms of lifting, shifting and moving from one 
place to another can be done by rod brackets threaded on one end. These rod brackets (4 pieces) are screwed on designated 
points on either side of the boiler (Figure 1). Four men are required for this operation. Boiler brackets are delivered with the 
boiler!
 

 
 
 
 
 
 
 

Summary of Contents for Grande 37 Lux



























Reviews: