Alfa Network Color Tester, Technical Manual

Page: 17 / 45

Technical Manual
– Color Tester
EN PROGRAMMING THE ELECTRONIC BOARDS
17
When the programmer is correctly connected and
detected, the software will show the message “PICkit 3
detected”.
When connecting the board to the programmer and
powering it, the software shows the message “Target
Detected”.
besides the DEVICE ID of the connected board.
WARNING: If you upload a MAB Workspace and connect
an SCCB board (or vice versa), the software will show the
error “Target device ID does not match expected Device
ID”.
When everything is ready, programme the board in “File –
Import…” and select the suitable firmware version.
Select the suitable firmware version and select “Open”.
If the operation is completed successfully, the display will
show the message “Loaded….”