Alfa Network 7806, Instruction Manual

Page: 6 / 36

NEXT 30 Iron Mod.7806
4. Connect the iron to a suitable mains supply outlet, pilot light will glow for a second then
goes off.
5. Turn the Temperature Dial in clockwise direction to 'MAX' position; Pilot light will
glow to indicate that the iron is heating up.
6. Pilot light goes off, when the required temperature is reached.
7. Move the Steam Control knob to position; steam starts to come out from the vents on the
sole plate.
8. Begin first time ironing with an old towel.
9. When the water tank is empty and there is no more steam can be produced; the preparation work
is completed. The iron is ready for proper use.
Spray
This function can be used at any time and it does not affect other
functions
1. Fill the iron as described in the section of How to Fill Water.
2. Aim the nozzle to the garment.
3. Press the Spray Button.
Note: It may be necessary to press the spray button a few times to
start the function.
Dry Ironing
1. Connect the iron with a suitable mains supply outlet,pilot light will glow for a second then
goes off..
2. Move the steam control knob to .
3. Turn the Temperature Dial in clockwise direction,select ‘
x
’ (1 dot), ‘
xxx
’ (2 dot) or '
xxx
’(3 dot)
or to MAX position according to the recommendation of garment label.
4. Pilot light will glow to indicate that the iron is heating up.
5. When the required temperature is reached,pilot light goes off.
6. The iron is ready to use.
7. After use,turn the Temperature Dial in anti-clockwise direction to ‘MIN’; then switched off.
8. Disconnect the iron from mains supply outlet.
9. When the iron gets cool completely, store it vertically in a safe place.
Steam Ironing
1. Fill the iron as described in the section of How to Fill Water.
FIGURE 5