Alfa Laval Unique Sampling Valve, Instruction Manual

Page: 6 / 18

2 Installation
This instruction manual is part of the delivery. Study the instructions carefully and pay special attention to the warnings!
The items refer to the parts list and service kits section.
2.1 Unpacking/delivery
Step 1
CAUTION
Alfa Laval cannot be held responsible for incorrect unpacking.
Check the delivery for:
1. Steam Generator
2. Instruction manual
Note: the gas canister is not included.
The gas canister can be purchased from the local
hardware store (diameter: Ø110 mm)
Step 2
Remove any possible packing materials from the Steam Generator.
Inspect the Steam Generator for visible transport damage.
Avoid damaging the Steam Generator.
2.2 Recycling information
• Unpacking
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
- Wood and cardboard boxes can be reused, recycled or used for energy recovery.
- Plastics should be recycled or burnt at a licensed waste incineration plant.
- Metal straps should be sent for material recycling.
• Maintenance
- During maintenance, oil and wearing parts in the machine are replaced.
- All metal parts should be sent for material recycling.
- Worn or defective electronic parts should be sent to a licensed handler for material recycling.
- Oil and all non-metal wearing parts must be dealt with in accordance with local regulations.
• Scrapping
- At the end of use, the equipment should be recycled according to the relevant, local regulations. As well as the equipment
itself, any hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt,
or in the absence of local regulations, please contact your local Alfa Laval sales company.
6