Page 42
Instruction Manual, SSB Retractor - Mini Retract-A-Ball
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A901-EN1
Re-Build & fitment of New Service Repair Kit
(continued)
17.
Fitting the Piston.
Stand the Retract-A-Ball assembly on the face of the Home Chamber so that the Spring points
upwards. Place the Piston Spacer onto the Spring as shown. Place the Ring Magnet onto the
Spring Spacer if required. The Magnet will only be required if Proximity Sensors are to be used
to indicate open & closed positions. See Figure 40.
Piston
Figure 40
1. Piston.
2. Piston Air Seal.
3. Circlip.
4. Piston Slide Ring.
5. Ring Magnet.
6. Piston Spacer.
3
4
2.
1.
5.
6.
