Instruction Manual, SSB Retractor - Mini Retract-A-Ball
Page 39
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A901-EN1
Re-Build & fitment of New Service Repair Kit
(continued)
11.
Fitting the Spray ball to the Spray Stem.
Ensuring it is clean, gently screw the Spray Ball all the way onto the Spray Stem. Slowly back off
the ball on the thread until the small slot in the neck of the ball aligns with the hole in the Spray
Stem.
Pass the Ball Securing Pin part No. TE75P555 through the neck of the ball & bend the end with a
pair of pliers approximately 10
°
to prevent it falling out. See figure 34.
12.
Fitting the Home Chamber/Stem Seal part No. TE75P538 or TE75P508.
Place the Home Chamber/Stem Seal part No. TE75P538 or TE75P508 into the O-ring groove in
the cap of the Spray Ball. See Figure 5.
Figure 34
Figure 35