Instruction Manual, SSB Retractor - Mini Retract-A-Ball
Page 25
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A901-EN1
Maintenance
(continued)
4.
Carefully withdraw the Inlet Adaptor from the Main Body tube. Ensure to be careful & keep the
Inlet Adaptor parallel with the Body Tube as it is withdrawn. Two seals will now be visible on the
end of the inlet adaptor stem. The larger seal at the end of the inlet adaptor stem is the cleaning
media seal and the second smaller seal is an air seal. Both should be examined to assess their
condition. See Figure 7.
5.
Between the Inlet Adaptor & the Body Tube there is a Solid Gasket Spacer Ring & two O-rings-
See Fig 9 below.
The Solid Gasket Spacer Ring (TE75P573) should be retained & used for re-assembly. The two
O-rings (TE75P511) should be replaced. See Figure 9 Below.
Figure 9
Figure 7
