Alfa Laval IsoMix External Drive, Instruction Manual

Page: 27 / 50

6 Maintenance
All position numbers and item numbers refer to the drawings shown and specified in chapter 8.1 IMXD without middle section
and 8.2 IMXD with middle section.
6.3 Replace drive unit
Step 1
1. Unscrew the bolt (35) attached to the drive shaft and remove bolt (35) and washer w. arrow (39).
2. Unscrew the four bolts (35) and remove the washers (36).
3. WARNING: Heavy – Drive unit weighs approx. 20 kg and is unsupported when the four bolts (36) have been unscrewed.
4306-0030
Step 2
1. Lower the gear motor (40) from the IMXD.
2. Replace gear motor (key on drive shaft shall fit into the key slot of the motor) and attached with washer (39) and bolt (35).
3. Assemble reverse of dismantling (see chapter 4.5 Installation, mechanically, Step 9).
27